品牌: TAMIYA
型号: TA 58598
库存状态: 有库存
HKD $1,300
购买所需奖励积分 1257
   0 评论  |  写评论
Tamiya 58598 1/10 RC Raybrig NSX Concept-GT(TB-04机箱)套件
  • 这个R / C装配套件模型重新创建了NSX Concept-GT,2014年的GT500级别的日本超级GT赛车系列中的孤岛发动机车。 它拥有醒目的Raybrig号衣。
  • 聚碳酸酯体精确地捕获了低鼻子和前端和后端的复杂组成。
  • 独特的后视镜和后机翼由独立的部件描绘。
  • TB-04机箱提供高效的轴驱动4WD。
TB-04:高效轴驱动4WD具有良好的处理
TB-04是一个高效的轴驱动4WD旅行车底盘,还提供其驱动器清脆处理,其主框架具有低重心,同时减少与轨道表面的接触到最小。 该布局将电池组纵向放置在右侧,电机水平位于左后侧,以在加速期间获得极佳的稳定性。 四轮双叉骨悬挂采用CVA油阻尼器,内置前悬挂(IFS)设置。 在TRF417底盘上改进的长转向拉杆系统为公路赛车提供了优化的阿克曼转向,而铝制传动轴和全滚珠轴承确保了动力传输平稳,以及前后齿轮差速器单元。
规格
  • 长度:475mm,宽度:188mm,高度:120mm
  • 轴距:257mm
  • 轮胎宽度/直径(前后):24 / 64mm
  • 浴缸型框架
  • 水平定位电机,轴驱动4WD
  • 前/后齿轮差速器
  • 3件转向拉杆
  • 4轮双叉骨悬挂(前面有IFS设置)
  • 前/后CVA冲击单元
  • 齿轮比= 6.60:1,当使用套件标准66T Spur和25T齿轮齿轮(可能从7.86:1到5.50:1的10个进一步的比率)
  • 需要类型540电机和电子速度控制器(ESC)单独出售。
单独需要的项目
  • 带ESC的2通道R / C单元
  • 车身,轮胎和540型电机
  • 电池和充电器
  • R6 / AA / UM3电池

Tamiya 58598 1/10 RC Raybrig NSX Concept-GT (TB-04 Chassis) Kit
 
  • This R/C assembly kit model recreates the NSX Concept-GT, lone midship engine car in 2014's GT500 class of the Japanese Super GT racing series. It features the striking Raybrig livery.
  • The polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.
  • Unique door mirrors and rear wing are depicted by separate parts.
  • The TB-04 chassis provides efficient shaft-driven 4WD.
The TB-04: Efficient Shaft Driven 4WD with Excellent Handling
The TB-04 is an efficient shaft-driven 4WD touring car chassis which also offers its drivers crisp handling, as its main frame has a low center of gravity while reducing contact with the track surface to a minimum. The layout places the battery pack longitudinally on the right with the motor horizontally in the left-rear for superior stability during acceleration. 4-wheel double wishbone suspension employs CVA oil dampers, with an inboard front suspension (IFS) setup. The long steering tie-rod system refined on the TRF417 chassis provides optimized Ackerman steering for on-road racing, while an aluminum propeller shaft and full ball bearings ensure smooth transmission of power, along with front and rear gear differential units.
Specifications
  • Length: 475mm, Width: 188mm, Height: 120mm
  • Wheelbase: 257mm
  • Tire Width/Diameter (Front & Rear): 24/64mm
  • Bathtub-type Frame
  • Horizontally-Positioned Motor, Shaft-Driven 4WD
  • Front/Rear Gear Differential Units
  • 3-Piece Steering Tie-Rod
  • 4-Wheel Double Wishbone Suspension (Front features IFS setup)
  • Front/Rear CVA Shock Units
  • Gear Ratio = 6.60:1 when using kit-standard 66T Spur & 25T Pinion Gears (10 further ratios from 7.86:1 to 5.50:1 possible)
  • Requires Type 540 Motor and Electronic Speed Controller (ESC) are sold separately.
Separately Required Items
  • 2-Channel R/C Unit with ESC
  • Body, Tires and Type 540 Motor
  • Battery Pack & Charger
  • R6/AA/UM3 batteries for transmitter

写评论

注意: 不接受 HTML 格式内容!
    差           好