這個R / C裝配套件描繪了一個自卸卡車模型,在那些在像採石場和大型建築工地的重工作。 該型號基於流行的齒輪驅動GF-01底盤。 

GF-01底盤播放了成功和有趣的RC套件,如Wild Willy 2,大眾2型和農場王Wheelie。 而這些套件包括一個2WD和易於車輪平台,新的GF-01是一個4WD化身,電機直接放在中心,以驅動前,後齒輪箱的齒輪。


眼鏡 
比例:1/24 
結構類型:裝配套件 
地形使用:多用途 
傳動系:4WD 
驅動類型:齒輪箱 
驅動線:狗骨 
差速器類型:齒輪 
懸架:完全獨立雙叉骨 
轉向機構:曲柄 
減震器:摩擦減震器 
減震材料:塑料 
輪胎類型:橡膠 
輪胎胎面:凸耳/銷釘 
主體材料:ABS塑料 
底盤材質:塑料 
電子速度控制(ESC):包括 
ESC型號:TBLE-02S 
LED燈桶:不 
LED燈:不 
電機:540刷類型 
軸承:塑料襯套 
可調彎度:固定 
可調節的前束角:僅前束 
可調離地間隙:固定 
可調齒輪比:固定 
可調軸距:固定 
可調軌道寬度:固定 
可調衝擊角度:固定 

  • 長度:350mm,寬度:270mm,高度:210mm
  • 現實的注模樹脂體具有單獨的駕駛室和後床部分。
  • 通過改變車身安裝座中的2個撐桿和卡銷的位置,可以在平的和升起位置之間交替後床。 注意:不建議將物體放在後床上,或者驅動模型升高。
  • 底盤和深輪輞輪部件是黃色模製的,具有真實的外觀。
  • 4WD GF-01底盤提供了大規模的優秀感覺,並使用集成在框架中的密封齒輪箱中的前差速器和後差速器。
  • 四輪雙叉骨懸掛使用摩擦阻尼器。
  • “方形”安裝底盤使用類似的胎面(194mm)和軸距(174mm)長度。
  • 包括扭矩調諧電機。
  • 配有直徑115mm的輪胎。

需要A:2通道無線電齒輪 
需要B:7.2電池和充電器 


This R/C assembly kit depicts a dump truck modeled upon those which do the heavy work in locations like quarries and large-scale construction sites. The model is based on the popular gear-driven GF-01 chassis.

The GF-01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Volkswagen Type 2 and the Farm King Wheelie. Whereas those kits featured a 2WD and easy to wheelie platform, the new GF-01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes.


Specs
Scale : 1/24
Construction type : Assembly kit
Terrain use : Multi-Purpose
Drive-train : 4WD
Drive type : Gearbox
Drive line : Dog bone
Differential type : Gear
Suspension : Fully independent double wishbone
Steering mechanism : Bell-crank
Shock damper : Friction damper
Shock damper material : Plastic
Tire type : Rubber
Tire tread : Lug/pin-spike
Body material : ABS Plastic
Chassis material : Plastic
Electronic Speed Control (ESC) : Included
ESC model : TBLE-02S
LED Light buckets : No
LED lights : No
Motor : 540-brushed type
Bearings : Plastic bushing
Adjustable camber : Fixed
Adjustable toe angles : Front only
Adjustable ground clearance : Fixed
Adjustable gear ratio : Fixed
Adjustable wheelbase : Fixed
Adjustable track width :  Fixed
Adjustable shock angle : Fixed

  • Length: 350mm, Width: 270mm, Height: 210mm
  • The realistic injection-molded resin body features separate cab and rear bed parts.
  • Alternate rear bed between flat and raised positions by changing the position of the 2 stays and snap pins in the body mounts. Note: It is not advised to put objects in the rear bed, or drive the model with it elevated.
  • Chassis and deep rim wheel parts are molded in yellow for an authentic appearance.
  • The 4WD GF-01 chassis provides an excellent feeling of big scale, and uses front and rear differentials in sealed gearboxes integrated in the frame.
  • 4-wheel double wishbone suspension uses friction dampers.
  • The 'square' setup chassis uses similar tread (194mm) and wheelbase (174mm) lengths.
  • Torque-tuned motor is included.
  • Comes with 115mm-diameter tires.

Requires A : 2-channel radio gear
Requires B : 7.2 battery & charger

如果您對本商品有什麼問題或經驗,請在此留下您的意見和建議!

注意: 評論內容不支持HTML代碼!
    差評           好評