[Scandinavian hard-workers who are proud of their strength] Scandinavia produces abundant high-quality coniferous trees that can be used as materials for high-quality furniture and building materials. This is a pre-painted electric RC car that reproduces Volvo’s log carrier, FH16 Globetrotter 750 6×4 Timber Truck, which works there. The cab, which uses a precision mold, uses stainless steel etched parts on the front grille for a realistic finish. The chassis uses a rudder frame that combines a resin cross member with side rails made of aluminum channel material. A motor is mounted on the front axle, and power is transmitted from the 3-speed transmission to the rear 2 shafts via the propeller shaft. A differential gear is built into the two rear wheels to create smooth cornering. In addition, the suspension equipped with metal leaf springs and friction dampers is also authentic. High-strength die-cast front axle and special reinforced resin rear axle are each float-mounted to ensure good ground contact. In addition, it is equipped with a TR Mighty Tune Motor (35T) that generates sufficient torque even at low revs, allowing you to enjoy powerful driving.
[Basic specifications]Overall length 733mm, overall width 194mm, overall height 306mm. Total weight = approx. 4.35kg (with RC mechanism and battery) ● Wheelbase = 363 + 103mm ● Tread / front / rear = 155/138 (double tire tread) mm ● Chassis shape = (aluminum + polycarbonate resin) rudder frame ● Suspension = Leaf rigid for both front and rear ● Caster angle / front / rear = 0 ° / 0 ° ● Camber angle = 0 ° for front and rear ● Toe angle = 0 ° for front and rear ● Damper = Aluminum dummy damper for front and rear ● Drive system = 2 rear wheels Drive ● Transmission = Always meshing 3-speed (shift by RC operation) ● Gear ratio = 1 speed 32.49: 1, 2nd speed 17.76: 1, 3rd speed 10.66: 1 ● Diff gear system = 3 bevel diff ● Motor = TR Mighty tune motor (35T) ● Tire width / diameter = Front: 30mm / 85mm, Rear: 22mm / 84mm
[Fully equipped with RC mechanism, etc.]
RC mechanism used: Self-neutral stick type 4-channel radio with slide lever type trim “Fine spec 2.4G” A 4-channel radio (transmitter / receiver set) “and a dedicated charger are also included.
[Equipped with Euro style multifunction unit (MFC-03)]The multifunction control unit with built-in ESC that enables not only normal driving but also extremely low speed driving synchronizes the realistic sound with various actions unique to trucks and creates a presence by linking the vehicle body vibration. In particular, the engine sound is the sound source of the heartbeat of an actual vehicle equipped with a large displacement diesel engine. From idling to full throttle, the engine sound changes according to the speed. In addition, almost all sounds emitted by the actual vehicle such as air dryer sound, air exhaust sound, and brake sound are reproduced. In addition, the stop lamps, blinkers, and back lamps can be turned on and off with the transmitter according to the operation, and the lighting of the headlights, fog lamps, hazards, etc. can be controlled by the transmitter.
[Body painted] The body color is painted with TS-54 Light Metallic Blue.